Looking for Step-By-Step instructions to load new game

[rydiez]

Hey Everyody,


I normally reach out to my pal Teamclark whenever I need to install a new game and he walks me through it .


I do realize that walking me through this a few times a year likely isn't very fun for him..


With that said, does anybody have step by step directions to install a game with the loader and dongle and E-key?


Thanks!

[777sizzler]

First off, Make sure there are NO credits on the machine, 2nd it helps to know what platform/brainbox you are using.  With power off insert the e-key 7 and loader in the front of box with logic door OPEN  -(make sure you don't have a device jammed into the little roller attached to the switch.  Power up and follow the on-screen prompts.  Repeat this process if you have more than one loader for a specific game.  Once done power down, remove loader and ekey and power back up and go in and set your game up and enable the game(s).  It will tell you to install the e-key to that.  It's all pretty easy once you have done it a few times.

[rydiez]

Sizzler thank you! You were right,  it was an absolute piece of cake.


Just added Ringling Bro Barnum and Bailey. By far the most interactive, most 3D, and all out fun game, I've played on AVP. Highly recommended

[777sizzler]

Your welcome. I don't know why some folks are scared of these.  After all the S-3000 is AVP.