To add to my woes with bulbs, I needed to replace the connectors/holders/sockets on the 8" tube that illuminates the reels in my Bally 742a.
On one side at some point in the past the original black Bakelite/Plastic tube holder on the left, had been lost and replaced with a pair of screw terminals which were probably removed from a cut down Termination strip, the one on the right was taped up.
I've searched Amazon, eBay UK and eBay.com in the US but can't see anything that matches the original black fittings.
I bought some of the ones that predominate in the marketplace - white plastic with a green rotating connector slot for the tube's pins to fit into, but they are too big all around.
Anyone got any idea where I might get a pair of sockets to replace the black ones?
I've attached photos of the screw terminals that were used, an example of the Bakelite holder that I need (in this example it's the ones behind the belly glass) and the typical holders that I have found on line that are too big.
Many thanks from the UK