Hi, so I setup Lord of the rings 2 on my BB2 with the bettor slots deluxe tito board. Worked great for about a week. Then all of a sudden it stopped taking tickets. I tried another working TITO board from another machine. That one wont work either. So i swapped the boards with a working machine and they work in that one so I can assume its my machine. Went through all the configuration settings and they are all correct. Cleared the ram and tried again. Still the same issue. Then I noticed the transmit communication LED on the backplane is flashing green. When it was working the LED light was solid green, also confirmed on another BB2 with a working TITO board. Is it possible that the serial port on the backplane went bad? The serial cable I used originally had a broken wire near the db9 connector. Is it possible that may have shorted the port? Deciding if I want to try a new backplane to see if that fixes it. Could I possibly use the Comm 2 port for the TITO? Any help, suggestions are greatly appreciated.