Hello
I recently bought a Bally E-1000 5ct Machine. It has EPROMs from the Flamingo Hilton. So maybe this Machine was even in Las Vegas.
However it also has some Problems:
1.) The Win Meter is flickering from left to right. So the numbers are flickering in the same frequency but one after the other and not all at the same time.
2.) The Coin Switch is reacting very slowly and sometimes you need to press it multiple times until the machine reacts. The coin switch itself is totally fine. I tested and replaced it. All contacts to the I/O Board are clean.
3.) The Reels are spinning way too long. It takes around 8-10 seconds until the first solenoid reacts and the first reel stops. It also shows often a 43, 42 error. I replaced the Reader Boards with one from a running machine which doesn't change anything. The Reel Reader test works totally fine.
I replaced the 33uF and the 2,2uF Capacitors on the MPU Board and also the 10000uF Capacitor on the Power Supply Board. I also cleaned all contacts and resoldered the RAM Board.
Hope someone can help me with this Machine
Greetings from Germany