1
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: U18 and U20 for Bally 6000
« Last post by Badbaud on Today at 02:08:16 PM »I have 9345 if you can't find that one.
Sounds good, I PM'd you.
Welcome to the NewLifeGames.com message forum!
|
1
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: U18 and U20 for Bally 6000« Last post by Badbaud on Today at 02:08:16 PM »I have 9345 if you can't find that one. Sounds good, I PM'd you. 2
IGT S and S-plus Reel Games / Re: S-Plus & PlayerÃs Edge-Plus Electronic Repair Manual« Last post by dirtyjim on Today at 01:50:32 PM »Thanks Chris-socal ! I am in ! Let the time vacuum madness begin!
3
IGT S and S-plus Reel Games / Re: S-Plus & PlayerÃs Edge-Plus Electronic Repair Manual« Last post by Chris-socal on Today at 01:17:17 PM »Hello: Welcome to NLG. The NLG File System is available to contributing members, which I see you are, but I believe you need to have 3 or more posts. Maybe you can reply to this, then make another post with a picture of your machine or something. In the meantime I can verify with Admin that it takes 3 posts. The NLG File System blue button at the top will appear when you have met the criteria. From there you will have access to all files that are stored based on manufacturer and within that the type of machine.
Chris 4
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: Konami podium monument« Last post by TK on Today at 01:08:24 PM »I think I have that one I will check when I get home and pm you, im looking for frogger cf3 game card if anyone has it. Thank you. I don't have this title. 5
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: Konami podium monument« Last post by TK on Today at 01:06:38 PM »TK and CVE, pm me. I can't send messages for some reason. Try sending me one please. 6
MAME Multiple Arcade Machine Emulator / Mame I-Pac« Last post by cptdunsal on Today at 12:32:03 PM »Does anyone know where the power OUT is on the I-pac 4. Im connecting some Optic Switches and I don't know where the 3rd wire goes. Thanks.
7
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: IGT S2000 1270 enhanced mpu board and backplane« Last post by hotlsot on Today at 12:10:03 PM »Bump, two more of these just arrived
8
Bally Reel Games / Re: 1987 3 line bally 5000 /serial number 5/is that good« Last post by Wingnut1419 on Today at 11:59:38 AM »Mine has all the parts i believe, but i have never worked one of these before.
I plug it in but only the fluorescents come on. Any ideas where to start? 9
Bally Electromechanical / Re: Bally 809-N« Last post by wolftalk on Today at 11:56:40 AM »Thanks Guys!! I increased the tension on the stepper spring and now it wizzes back real fast. fwiw, you can get away with that when a stepper unit doesn't step up too many times, but you should still verify the unit steps up all the way without struggling at the top step(s) if you add tension to the torsion spring. the payout counter spins the wipers more than 720 degrees, so if the torsion spring is too tight, the unit can't step up far enough and you get runaway payout and/or safety shutdown. 2 turns of tension when the unit is reset is the normal amount, increasing to maybe 2.25 or 2.5. Anything more than that and the problem is elsewhere: - cruddy rivets / wiper contacts - sticky/dried lubrication on ratchet shaft - excessive wiper tension onto the rivets 'course, someone may have installed the spring with too little tension, so try and remember the 2 turns rule so ya don't need to keep looking it up like I do. 10
Bally Reel Games / Re: 1987 3 line bally 5000 /serial number 5/is that good« Last post by freddie200 on Today at 11:56:08 AM »give me a minute for pics
no mine is not working missing main board and power supply |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |