Bally S6000 Triple Blazing 7s

[txplayer05]

Hello, I have a Bally S6000 Triple Blazing 7s that has the grey colored coverers installed on the motherboard where the dip switches would go. I now have a pair of dip switches that I am ready to install on the board but need help with the settings or if possible some instructions on how to set them up. I also have purchased some leave in chips. I would like to know if I can change the denomination, winning percentage, and possibly add the feature where the reels will go one up or one down on their own after a spin through the dip switches? Hopefully someone can help me with a manual or some instructions on how to do this as I've tried to search on the download section but could not find/download any material. My machine has s progressive bar that I would like to enable and it also has a printer that I would like someone's opinion on whether its even worth using the printer or not. Can I upgrade the bill validator to be able to accept newer bills? Thank you very much for your help.   

[Badbaud]

Go to my website www.slotmachinerepair.com and download the free PDF on settings for the S6000 under "helpful PDF's".