Well, my slot guy who I have been buying off of for a few decades is pretty much out of IGT s-plus machines...which is what I have the parts for & software!! Well I have decides to move along to the bally s6000s..... I bought a ton of 2 meg chips, have a bunch of 256 eproms, & bought a mostly full set of software for these machines.The FIRST problem I have is my 9344 chip images seem to be corrupt. its for a money bars 5 line (which I have two of) & in my programmer it comes up all zeros & does NOT WORK in my machines. I have burned other games & tested everything else...its the chip images for sure. I know there are a few different payout versions of this but I only have the 9344 in my library & they are bad. Can anyone send me the images for U18 & U20 for the Money bars 5 line?Problem 2: I cant seem to find the right name for this slot machine (pic attached) it says bonus line all over it & has blazing 7s on the glass and 4 reels. Anyone have a clue so I can see if I actually have the files? I have looked through the list on here & I cant seem to fins the proper name of it, there is no bonus line.Lastly, if you are still readying this I am in need of some coin comparitors, the 16-d 24V ones obviously for the bally 6000s. I NEED 3 right now but would buy 10-20 if you have them. My direct email is mrcrazy@roadrunner.com
THANKS you guy always help me, I think I can figure out these bally slots as I have been reading on here for DAYS now about them!!!
Greg