Replacement for Bally 5000 Plus Power Supply

[ThatDudeFromEurope]

Got an Bally 5000 Plus machine and after pulling the power supply, I can see capacitors have leaked all over the place, including melted glue. I figure it's not worth trying to repair it, as the damage is pretty extensive.

So I'm looking for a new power supply. However finding an original is pretty much out of the question. So, can anyone link to a power supply from Mouser, Jameco or somewhere else, that can be used instead?

[Malyki]

I would double check with other members before pulling the trigger but I believe this PSU can be used for a S5000+.


https://www.mouser.com/ProductDetail/MEAN-WELL/RQ-85D?qs=%2Fha2pyFaduhG7osK27JVMOSO1g%2FlW%252BvEpYV%252Bl0nWn%252B8%3D

[Slot Tech Mike]

Call over to Alan at KLAR in Vegas. Alan has a direct replacement unit that will drop in and outlive all of us 

[Badbaud]

At KLAR we have been using the Meanwell RQ-85D, the 24VDC only handles 1 Amp instead of Bally's recommended 3 Amps but it works fine.

[ThatDudeFromEurope]

Have ordered a Meanwell RQ-85D, will let you know how it goes.

[Badbaud]

Attached is a cheat sheet I made for the power supply.

[Badbaud]

At KLAR we have been using the Meanwell RQ-85D, the 24VDC only handles 1 Amp instead of Bally's recommended 3 Amps but it works fine.

In the past I did find 2 games that did not like the 85 version, the reel motors were very sensitive, and I used a RQ125D with 2 Amp 24V rating to solve the problem.