Hi everyone , I am stuck , need help please :
I ended up with montecarlo 6000 , and tried to clear chip it , I have set of clear chip that I know it works, but I order new set from Rudy's deal that promises me that it will make the printer work , I know that I must have 2003 and newer chip on my board and I do have the 2004 set chip on my board, so I have clear chip and it did not work , it shows me code ( 83F1), so I used my old clear chip and it did clear the board and I was able to set the game up but the MEI bill validator did not take the bills, I turn the switch up on the front of the main board that will not take the coins and the light on the front of the machine came on that is green ( bill validator on the out side of the machine ) the MEI shows all 3 lights and when I push the test button once to put it in the test mode , it did take the bills and gave it right back to me (I think that means that the MEI works ) but the machine did not take the bill,i tried to use the new clear chip from Rudys deal to see if that will work and the code ( 83F1 ) came back up again , I tried to use the old clear chip and now that does not work ( I do holed the test and presido button at same time ) and I mean nothing shows , what do I need to do guys , help please thanks