Bumping AND adding the "Step Right Up" Version would be OK as well....

Thanks

SM

Hello,

I have a Ceronix 1492 monitor out of a Players Edge Poker machine. The game plays as it should but no display. I’ve ordered in a cap kit for the monitor but in the meantime would like to do some testing to see what the underlying issue might be. I’ve tested the fuse and it’s good, I’ve also checked at the connector that there is power going to the monitor.

Any recommendations on where to start?

Thanks in advance for any help!

    I have a BB2 that gives me a message after loading a game.  It says PS LINK Lost.   Have I missed something in my set-up or do I have a different problem.   Any advise would be greatly appreciated.  Thanks   J. 
 

It might work!
It's just really to keep light escaping out of the reel glass area around that display rectangular display.

I have a 5500 machine that apparently has a console mpu and it's a stand machine. This explains the lower case switch fault. What pins do I need to do what with to fix this? It has new chips and works fine in test mode.