Thank you for answering! Not sure how the site works, but did a $50.00 donation tonite, so not a full contributor and cant answer your message thru here. I copied your email address (i think) and responded that way. Hope you receive. Many thanks for telling me what i need, if you can fulfill that would be great.

Sorry, i posted in wrong place. it's a Bally S9000, not an alpha

Hi All, Not sure of which Alpha I have and need clear card after replacing 3 batteries. Came aboard as an old ATM tech, so replacing batteries not a problem even if soldered to board. But, right now feel like a pretty big dummy! Not sure which Bally Alpha I have and after getting notice on screen when powering up, a ram error after installing 3 new batteries. Hope the picture attachments and someone kind enough may help me.
Which version Alpha i have and version of clear card needed? Thanks much!

My Triple diamonds bill transporter at power up use to cycle and has stopped, only clicks now, and ideas?

Just some thoughts... I remember my S+ bill mech making a bad noise when initializing once when the cash can wasn't fully seated.  It that's not it, I'd pull the transport and inspect for a jam, binding or possibly a missing gear tooth?

I put an S+ button harness on mine and S+ square buttons.  Easier to find and cheaper.