21
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION
« Last post by David Walz on Yesterday at 07:00:50 PM »Handle pull....
Welcome to the NewLifeGames.com message forum!
|
21
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by David Walz on Yesterday at 07:00:50 PM »Handle pull....
22
IGT S and S-plus Reel Games / Re: Unusual game it s plus« Last post by knagl on Yesterday at 05:23:48 PM »Thank you never saw one with this type of low jackpot numbers on a 5 line dd I can't say I've seen that particular machine, but I have seen pictures of machines that were designed for army/military bases and they generally had pretty low top awards for some reason. Another possibility, since you said it was an intermediate cabinet, is that it was used on a ferry or casino boat and they didn't want to have large jackpots to have to pay. 23
IGT Reel Touch Games / Re: Lobstermania gets stuck initializing« Last post by lookes on Yesterday at 04:48:06 PM »Yes...that's why it's good to have spare boards so you can swap stuff around to find out what's good and no good. I do check that the board is going to boot with the customer's chips if they provide them. I don't actually need them to repair the board tho. For a single board, if it is sent USPS priority mail medium box, the shipping cost is the same with, or without the tray. For multiple boards, take them off the tray to save shipping cost both ways. 24
IGT Reel Touch Games / Re: Lobstermania gets stuck initializing« Last post by Stayouttadabunker on Yesterday at 04:32:07 PM »Yes...that's why it's good to have spare boards so you can swap stuff around to find out what's good and no good.
That's a good idea to send it out to Lookes...I hope he has some time to look at it. To save some money on shipping, I'd remove the MPU from the heavy metal tray it's screwed onto. All he needs is the circuit board itself, and the chips. I'm only guessing when I say he probably tests the chips, and makes sure they're seated correctly too. 25
IGT S2000 and Vision Games / Re: BAD PCB Board S2000 QUESTION« Last post by lookes on Yesterday at 04:26:26 PM »I am still fixing them. Send them over.
26
IGT S2000 and Vision Games / Re: Reel 5 Spins Backwards on Startup. Vision Game with 504 MPU« Last post by Stayouttadabunker on Yesterday at 04:19:33 PM »I think the reason why sometimes "it doesn't spin at all" is because the reel symbols are already in the correct locations.
You can just about guarantee the reels will spin, if you move any one reel basket by hand just a little, while the door is opened. 27
Bally Reel Games / Bally 6000 sound board question« Last post by ucanwin on Yesterday at 04:13:47 PM »Hi,
I have a question, and I'm sure that one of you knowledgeable members can help me understand my problem. I have a Bally 6000 Beach Party slot machine that has sound when a hand pay is made, but when a BONUS symbol comes up on the reels there is no sound for that feature. The feature goes through the motions, and puts up credits, but there is NO sound. This machine has a sound board on the upper left side of the cabinet with a U-3 chip number PS00000GNRC2-00 BMB 01/22/01 2001 L01-0515 in it. The person that I bought the machine from told me that this is a generic chip that someone put in the machine, and it is not the correct one. Well.....my question is....generic or not, shouldn't there be some sort of sound when entering the BONUS feature on this machine? Is it possible that the board itself might be a problem? Does the sound on a hand pay originate from this board, or is there a chip on the main board that creates that sound? Someone please enlighten someone who is not smarter than a fifth grader. Best regards, and thanks for any comments on this issue. Jerry 28
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / IGT/Kortek gaming control box« Last post by Chuck spurlock on Yesterday at 03:44:31 PM »Model kt-ivy20
$200 plus shipping 29
IGT S2000 and Vision Games / Re: BAD PCB Board S2000 QUESTION« Last post by Akriegs on Yesterday at 02:11:46 PM »it appears i have 4 bad boards. the 501 did not work. I have 2 that power up and get to the closed door. I have 2 that lights turn on but no bill cycle and nothing happens. Any suggestions for the 2 that do nothing. I checked the battery and i get 2.9 out of the 3v battery. I took a know working board and placed into the broken machine. It boots all the way and spins the reels but says i am using a 9 button game. This new machine is only 5 button. So the machine i believe is good but i am trying to get one of the broken boards to work.
Thanks for post lookes. You have repaired several of my boards in the past. I think i will be shipping out a few more if you are still fixing them. 30
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: WTB Hopper or Hopper Motor for Bally Electromechanical 1008« Last post by crayw on Yesterday at 01:25:56 PM »I have em hopper. Let me know if you need it.
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |