Tito ticket vs Hopper pay

[jonbbrew]

Hello,

Ordered a tito and printer setup. My s2000 currently has full coin in/out but now adding a tito/printer(on the way). From what i have found so far the tito set up makes cash out button print tickets. Does going to tito system just basically cancel out my hopper use now? Is there a way to have both options to pay from?

[Stayouttadabunker]

You can enable both cashout options in the S2000 settings.
That information sheet is readily available in the NLG File System.

[BettorSlots]

You will enable "partial pay" on your S2000 and then set both the hopper limit and partial pay limit for a desired amount.  This means you are telling the machine to pay out a certain amount in coin to the hopper and the balance will be printed on a ticket.  So for example you enable partial pay and set the hopper and partial pay limit for $10.  You cash out $30.75, then $10 will spit out from the hopper and the balance of $20.75 will print on the ticket.  This feature should be covered in the S2 manual or for sure as Mark said there are several posts on the subject that you can reference.