Author Topic: Setting up TITO@HOME on a working Bally S6000 (Read 1796 times)

Pinaddicted · « **Reply #20 on:** November 17, 2023, 02:54:45 PM »

My new Bally S6000 main chips arrived today and they are the same as the ones I want to replace. They are missing the settings for TITO listed below…

92 SAS Bonusing should be set to 0003, but it only offers 0000 and 0001 for options

The next 4 settings are missing completely…

19HI Asset Number
19LO Asset Number
17 Set SAS Version
29 AFT Registration

Are there different switch/jumper settings needed to access these missing settings? I specifically told the seller that I needed 2005 or newer mains to be used with a TITO setup.

Thanks, Mark

Sunrise Side · « **Reply #21 on:** November 17, 2023, 03:09:59 PM »

The mains have the different options available. You need verified 2005 or newer mains in order to get the options to use TITO. No other settings have anything to do with accessing those options. Printer Support mains are 2003 which allows the printer to work but not have options for TITO.

Pinaddicted · « **Reply #22 on:** November 17, 2023, 08:56:46 PM »

Quote from: Sunrise Side on November 13, 2023, 12:22:47 PM

Correct. You need newer mains. I may have a set. PM if want to purchase.

I'll take you up on your offer, I'm tired of dealing with this other guy with a website that insists his mains are correct when they truly aren't.

His messages got downright rude and accusatory before I just cut it off. I'd like to OUT the person, but this isn't the place to do that.

Does Bettor Slots version of TITO require the newer mains, I assume it does?

Tilt · « **Reply #23 on:** November 17, 2023, 09:35:28 PM »

I see you've met JJ slots

Pinaddicted · « **Reply #24 on:** November 17, 2023, 09:40:51 PM »

Quote from: Tilt on November 17, 2023, 09:35:28 PM

I see you've met JJ slots

You are correct, we're still going at it.

Just consider it $20 down the drain.

Tilt · « **Reply #25 on:** November 17, 2023, 09:50:16 PM »

Good luck. I dealt with him on ebay a few years back. He sold me a bunch of defective sim cards and refused to take them back. Left me negative feedback over it too. Ebay got involved and got my money back.

Pinaddicted · « **Reply #26 on:** November 17, 2023, 09:55:50 PM »

He claims that TITO@HOME requires newer mains, and Bettor Slots TITO doesn't.

Is this true? I thought the setup for both was identical?

Tilt · « **Reply #27 on:** November 17, 2023, 10:06:01 PM »

No, they both use the same SAS settings.

Pinaddicted · « **Reply #28 on:** November 17, 2023, 10:22:43 PM »

Are these newer mains really that hard to find? The missing settings are listed in the later version of the Bally ProSlot 6000 manual. I did see a 2003 version also, and they aren't listed there.

Tilt · « **Reply #29 on:** November 17, 2023, 10:38:35 PM »

No, they're readily available. Didn't Sunrise side have a set? If not, RB probably does.

Sunrise Side · « **Reply #30 on:** November 18, 2023, 08:11:44 AM »

I will check today on a newer set of mains. All TITO's need the newer mains to work. JJ's mains with printer support are for printer only, no TITO, as you already know. I will get back to you on the mains.

Pinaddicted · « **Reply #31 on:** November 18, 2023, 08:17:23 AM »

Thank you!!!

I'm definitely done dealing with JJ slots in the future.

Pinaddicted · « **Reply #32 on:** November 18, 2023, 09:41:23 PM »

Quote from: Sunrise Side on November 18, 2023, 08:11:44 AM

I will check today on a newer set of mains. All TITO's need the newer mains to work. JJ's mains with printer support are for printer only, no TITO, as you already know. I will get back to you on the mains.

New mains found, thanks to Sunrise Side!!!

Pinaddicted · « **Reply #33 on:** November 24, 2023, 09:51:32 PM »

The new mains arrived, and I finally have all the settings available for TITO

A couple strange things happening though... 2 or 3 of the accounting counters in the top section are just clicking away counting something very quickly... nonstop??? Second thing is that I can't add credits with the change button, it goes straight to JP HAND PAY. I followed all the directions for setup.

Sunrise Side · « **Reply #34 on:** November 25, 2023, 07:24:47 AM »

In 11d is your limits 56 set to 8000 ?

Pinaddicted · « **Reply #35 on:** November 25, 2023, 07:38:48 AM »

Yes it is.

What would cause the counters in the top section to go non-stop? It looks like they can simply be unplugged if not needed for some other purpose.

a69mopar · « **Reply #36 on:** November 25, 2023, 08:08:31 AM »

how many credits do you have the tito set for? If it adds too many credits, it will go to hand pay. the counters are probably trying to catch up from the credits in as well as payout.
I believe the switches on the tito@home need to be set to off for 1000 credits.

a69mopar · « **Reply #37 on:** November 25, 2023, 08:16:13 AM »

Attached is Brian's instructions. It's probably on the forum already, but I thought I'd add it.

Sunrise Side · « **Reply #38 on:** November 25, 2023, 08:21:22 AM »

Unplug the counters

Pinaddicted · « **Reply #39 on:** November 25, 2023, 08:33:21 AM »

I have Brian's instructions printed and programmed as described. It prints and accepts vouchers ok. I need to recheck the dip-switch settings on the TITO board, I believe they are both in the ON position.

News:

NLG Site Navigation Menu

Author Topic: Setting up TITO@HOME on a working Bally S6000 (Read 1796 times)