I turn the machine off. I push the white button hold it turn the machine on. It gets me into the clearing of the ram which I do and then go to gameplay it immediately shows call attendant, I open the door and it gives me an alarm for a ram error turn attendant key for more information.
The next screen is a critical data, error, recoverable error, turn attendant key switch to clear which I do and get a blank screen for about five seconds and then press and hold switch for 2 to 3 seconds after I do that initializes the system and makes me wait.

A few seconds later, the main screen appears and then the main battery low options verification required bulletin comes up. All these last steps are done with the door open. I close the door. The only change on this bulletin is call attendant above the main battery low.

I hope this helps and I appreciate the help.

 

How about starting with a picture of the machine.  It could be a S+ or a S2000 and we need to need to know which one it is to start helping you.  Photos have to be less than 1MB in size to post, so resize it as necessary to get under that limit.

sixcardmark,
    Thank you for your update this evening.
              dirtredroad

Is machine actually going into a closed door state? Does the MPU have a leaking varta battery on it?

I did,2354 + side up,3.2v checked.

I’m stumped here.

But thank you!