Bill acceptor on bally s6000 Monte Carlo

[barron250]

Hi, I have a s6000 monte carlo, I have done reset with chips, Game resets I have no error codes, But Green arrows on bezel light up for approx 10 seconds then red circle with line through it comes on.  I open the door everything resets as normal green arrows come on then off and red light comes on. I have chipped game again and still the same, Any help would be great...Thanks  And it is a wba  Acceptor resets as normal.

[pbwizard25]

Are ds2 #5 on and #6 Off?? Make sure the coin mech switch is up on the board. If ds2 settings are not correct switch them and the clear again. Scott

[barron250]

Hi yes 5and6 are off and switch is in up mode.  I have chipped several times still the same arrows are green 10 seconds later red circle pops up.  I have other machines i will try another board.

[cowboygames]

I would try a different WBA if you have one

[barron250]

I have tried about 6 of them and still the same.

[pbwizard25]

ds2 #5 is supposed to be on and #6 is off, not both off .

[barron250]

I have done that mode also on the # 2 dip and does not correct the problem. I tried a different board and still the same. It might be something in the wiring.

[pbwizard25]

Did you do a complete clear after setting ds2 #5on and #6 off?