1
IGT AVP (Including G20,G23) / Re: Trimline door open m notification
« Last post by Heikka on Today at 02:34:33 AM »Hi.
My trimline still has 'DOOR OPEN M' notification and it won't go away when door is closed alhough I/O card, PCB and backplane and distribution board has been replaced.
Switches has been tested and those are working as should.
There are two switches in the cabinet for the front door and 6 wires are connected to those. Any idea to which sockets/pins those goes?
My trimline still has 'DOOR OPEN M' notification and it won't go away when door is closed alhough I/O card, PCB and backplane and distribution board has been replaced.
Switches has been tested and those are working as should.
There are two switches in the cabinet for the front door and 6 wires are connected to those. Any idea to which sockets/pins those goes?