Gameking Ram error help please

[joerak]

Forgive me naivety, I haven't touched my gameking 6902 in years.  I went to boot it up and got a ram error.  My guess is that the battery has died, and I'll likely need a new battery and reset (new chipset?).


Anyway.  Here is the error screen before I try to clear the error... but it just comes back. 


I would very much appreciate any advice to get this working again.


Thanks!


Also... I'm looking to upgrade to a 6.2, and would consider trades at a good discount if you would rater fix it   I'm in the Cleveland area.


Thanks,
Joe

[rickhunter]

You will most likely need a key 22 to clear the error.  You need to replace the battery first though.  Gameking 6.2 software is on an 044 flash board, so you will need to upgrade to an 044 backplane and MPU if you don't already have that, in which case you need a key 40 (044 MPU and legacy daughter card) and not a key 22 for your issue.  Gameking 6.2 requires key 28 to clear and key.

[spudgunman]

Replace the battery first see if that helps for sure.

[joerak]

  I replaced the battery, key 22, and it is working perfectly.   Thanks so much guys!!!