Reel touch chips

[Randy0777]

I picked up some reel touches that had dead batteries ,which is not a problem...except I do not have any. Anyway, it looks like the boards were put make in the machines,but not the right ones  So not sure which boards (chips) go in which machine. Some of the Bucks Ahoy has legacy boards on them, others don't. Same as the Denver Ducks, Lobster Mania and Tabasco. I looked on the old site,but no luck. Looking for a list of the diff chip versions. 

[DF777]

I just got  2 Tabasco's SG00536

[LINDAM]

What chips do you have and with what machine (SB & SG)?

[Buzz]

Randy If your needing the SB chip numbers, look on the main page, about half way down on your right. Under 4 Deuces FAQs, click on reel touch,
 
I did kind of a search using Mississippi Gaming and they show SG000299 game chips for Bucks Ahoy,Denver Ducks, and Lucky Larry. I couldn't even find Tabasco.
 
Let's be clear, no way in hell am I saying you need SG000299, I don't know I've never had a reel touch. This is what I found.

[Randy0777]

I was able to figure out some of the bucks ahoy. This is what I came up with so far...
Boards with Enhanced daughter boards
1,SB 566
 SG 536

2, SB 566
 SG 299...With audio simm card

3, SB 570
    SG 301

4,  SB 523...Denver maybe
     SG 387... With audio simm

5,  SB 523...Denver ?
     SG 299...With audio simm

6,   SB 565...Lobster
      SG 387

7,  SB 566...This is bucks ahoy
     SG 387

8,   SB 535
      SG 590

9,   SB 537
      SG 301



     

[qbert]

I can confirm for Denver Duck 1270 legacy and 504 board using SB523 and SG536 for 75 credit machine.

[LINDAM]

SB-566 & SG-536 is Bucks 75 Cr.

[Randy0777]

Thanks for the replies...its narrowing down   
None of the local stores (that I checked) carriers CR 2354 batteries , I replaced the solder batteries ,but waiting on the others in the mail    I had one in another game that I've been swapping around,but that's getting old   

[LINDAM]

FYI:
There is also a battery in the top box on the mother board for the BIOS. It just a regular P/C battery. a 2032

[Randy0777]

Thanks Lindam.
I replaced all of them. So far I used 27 batteries,between the solder and the MB...If I only had the 2354 

[LINDAM]

FYI:

Reel touch machine are very persnickety. Everything must match for them to work SB & SG must be a good match and they must match your hard drive files and the M/B BIOS. If any one of them is not a good match for any of the others you'll not get a full boot up. So keep all stuff that was together when you got them together.

[LINDAM]

I'd help you out with batts, but you're a little far away. I always 30-40 of all the batts. If you have any questions latter, don't be shy.

Lin