Hello I setup a new MPU for a working IGT S+ so I could have another MPU with the same game. I did the clear and set. The DBV came on and lit up after all that work. I then noticed to DBV 200 stopped lighting up and would not accept bills even though it's enabled. I then changed out power supply and checked all the wiring it looks good. The DBV cycles fine but will not light up and come on. I put the original MPU in and the DBV still won't light up. I searched NLG for a solution but I could not find one or maybe I missed it. Maybe I bumped a wire during my clear and set procedure. I'm just at a loss right now. I even put another DBV 200 in it and still the same cycles but will not light up. Thanks for reading.
SOLVED..I had to change setting 8-2 to 8-1, plays fine now DBV came back on. The other board would not change from 8-2 to 8-1, no option to change. SPIN button would not light up for me to change it. Oh well maybe a dip switch. FIXED DIP Switch set up for SP944 (BONUS Sizzling 7) for credit only 1on 2on 3on / 4,5,6,7,8 all off. Fixed the 8-2 to 8-1 problem.