Hello all.
Just joined the forum, so noob here. I work in electronics, but I have never dealt with slot machines before. I recently acquired a Bally E2242-63 slot machine. It would work after a little messing with when I first got it. Now I cannot proceed after the first spin.
I can power it up and reset the machine so it accepts coins. However, when I pull, all three reels spin, stop, and then it just sits there. No error codes. The Insert Coin light remains off and will not accept coins. The LCD displays 1000 after the first spin. Nothing else happens.
I'm hoping someone here can point me in a direction for troubleshooting. I do have a service manual with schematics, so the helps, at least. I just would like a place to start checking.
Thanks for any input you can provide!