873 flasher relay

[Herbie21]

Hi boys,


I am replacing a flasher relay in my 873-A. I can figure out how to connect the coloured wires but don't know where to connect the black wire, with the resistor, to? Any Idea[size=78%]?[/size]


Herbs


 

[Nurbo]

Hello,




I don't have the black wire on my Bally 873 

[wolftalk]

the 100 ohm resistor is connected to wires 13-3 and 20 (red/yellow and blue).  Wire 20 is the 6V fused power wire on all the 6V lamps.   You have one end of the resistor on 13-3 already.


some 873 models had the resistor, some didn't.  Don't know if the coils were different ... your pics look like the unit is physically different so maybe the coil is different also.

[Herbie21]

Thanks, I think this flasher is from a 831, maybe that's why, cheers