WTB: IGT s-plus HOPPERS in ANY denomination! I need 10!!

[mrcrazy]

Please, I need 10 hoppers for the IGT s-plus machines (upright) ANY denomination... if you can help me please message me. Ill pay shipping of course & im in the cleveland Ohio area.

thanks!

Greg

[CVslots]

We may be able to help you, but be forewarned, CA to OH is one of the most expensive shipping lanes I know of. I will check stock and let you know. May want to go LTL?

[GOS]

another way to go - buy s2000 hoppers and S+ holley wheel dollar hoppers - you can make s+ out of the parts.

[mrcrazy]

you can?? the hookup is different & I was told one is 24 volt & the other is 12 volt.... I was told its not possible....

Greg

[GOS]

you remove the top parts from the s2000 - bowl down to frame holding the coin wheels etc - and swap out with the holley wheel parts - you don't use the motor and harness at all from the s2000  - I have done this many times.  There are lots of s2000 hoppers (mostly new) and there used to be a lot of holley wheel hoppers.   

[Neonkiss]

you don't use the motor and harness at all from the s2000  -

If you don't have a S+ hopper to start with and you use a S2000 hopper less the motor and harness, What motor and harness will you be using 

[GOS]

you are using the base of the S+ =  the wiring = the motor - you are NOT USING the wiring and the motor from the S2000. 

[mrcrazy]

yeah thats no help as I have nothing... a bunch of slots missing all hoppers....

I have found a few on here, but STILL need like 6-7 more... please if you can help me message me...

THANKS!

Greg

[GOS]

hard to find s+ hoppers - easy to find s2000 and there has to be holley wheel hoppers available.   since the s2000 hoppers are CHEAP and the hollys as well - just some time and effort is required.

[Neonkiss]

you are using the base of the S+ =  the wiring = the motor - you are NOT USING the wiring and the motor from the S2000.

GOS I'm not sure your reading this WTB He has no  freaking S+ hoppers.

Jack in the Box "aint no freakin french fries"

[GOS]

I SAID FOR HIM TO FIND S2000 AND S+ HOLLEY TO MAKE HIS OWN!!!!!!! since no one is offering up an S+

[CVslots]

We have them, but just can't let them go for pennies....SUPPLY AND DEMAND. We all know how hard S+ hoppers are to come by anymore. Few years ago, we were turning them down by the pallet, and that was when we could have had them for free just to haul them off. Nowadays, it's a different game, now the offer is for S2000 hoppers by the pallet!

[mrcrazy]

Still looking for a few more of these...PLEASE post or contact me if you have one (or more) you can sell me...

thanks in advance!

Greg

[IFFV68]

Rudy's Steels & Deals had them on their web. I didn't check if it was current.
May be a hit or miss?

[mrcrazy]

he only has s2000's on his site, not the s-plus...and I did email him already....

Greg

[Blueridgeslots]

What will you pay for reconditioned S+ Upright Hoppers. Any Denom, most will have new not used Pin and Shelf Wheels/??

Have 50+ in stock

[mrcrazy]

I still need a few more of these...anyone have some s-plus hoppers for sale?? please??

Greg