11
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: Need bally s6000 game chips
« Last post by erbs on Yesterday at 07:24:01 PM »Contact member RB he should have them.
Welcome to the NewLifeGames.com message forum!
|
11
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: Need bally s6000 game chips« Last post by erbs on Yesterday at 07:24:01 PM »Contact member RB he should have them.
12
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Need bally s6000 game chips« Last post by Coloradonewbie on Yesterday at 06:25:28 PM »I need game chips for Blazing 7's 3 coin.
I also need newer mains so I can install tito. 13
IGT AVP (Including G20,G23) / What type of buttons are these?« Last post by sakwilla on Yesterday at 06:12:14 PM »Bought 8 buttons and connected them all up and turned machine on - they seem different to the two at the bottom row (bottom left and right) No issues with them but they seem slightly thinner to the other two. Just want to know if they are a special type as usually when I buy them they are the standard. IGT ones life the bottom left and right ones.
14
IGT S2000 and Vision Games / Re: where to find /igt s2000 ez play selectable multi denom keypad replacement« Last post by TheEyeInTheSky on Yesterday at 06:04:27 PM »If you're looking for the multi-denom decal, then here are 2 simple places to start. What denom values are you looking for?
https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=igt+multi-denom&_sacat=0&_odkw=igt+s2000+multi-denom&_osacat=0 https://get-t.net/product/igt-s200-touch-denom-pad-w-control-board-and-brackets-complete-door-kit-gett-part-td100/ 15
WMS Williams Video / Re: WMS BB1 Can't Initialize CF Drive« Last post by Moose on Yesterday at 04:46:33 PM »Looks like just a bad Top Monitor CF Card.
16
Universal Reel/Video Games / Re: #12 error?« Last post by Pitts256 on Yesterday at 04:23:47 PM »Error "41" is the 1st Reel is spinning improperly. Could be a couple of things; the reel motor bearings are stiff or the electrical connections are oxidized and not making a good connection. Use will free up the reel bearings. The three white Molex plugs at the front of the reel tray though should be unplugged and plugged back in several times to improve the connections. Cleaning the plugs with some Deoxit spray certainly wouldn't hurt either.
Another possibility would be the edge connector on the backside of the CPU board. Same applies, check for bent pins and clean with Dexoit spray. Resetting an Error 41 with the yellow reset button is the correct response. 17
IGT S2000 and Vision Games / where to find /igt s2000 ez play selectable multi denom keypad replacement« Last post by freddie200 on Yesterday at 04:20:16 PM »my s2000 has the 4 square led behind the 25 cent sticker on the reels glass ive seen multi denom setup in the options menu want to find the touch screen denom selector key pad
any ideas where to look thanx freddie 200 18
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by David Walz on Yesterday at 04:02:37 PM »More parts installed, labeled parts.
19
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by David Walz on Yesterday at 04:00:57 PM »More parts reinstalled, labeled parts.
20
IGT I-Game and Game King / Re: Brand new Machine owner... Potential issue« Last post by Chris-socal on Yesterday at 03:47:34 PM »I just have to jump in and respond to "Nitro Force" spray. I have worked for Horizon Hobby for 34 years (I am not a technical representative of our company, I work in distribution). Nitro force is great for all kinds of stuff, it's similar to Electronics cleaner but it is designed to blast into motors and leave zero residue. It's fine for what you are doing.
One thing I'm unclear here. Is the advice that dunginhawk pull the eprom and spray clean the socket? If so, when pulling the eprom rock it out carefully and take an eraser to the legs to clean off years of oxidation. Spray the socket and re-insert. As mentioned, be very careful not to break off the legs. Best of luck, I'm anxious to hear how this works. Chris |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |