Bb1 Open Door L Error

[YoEleven]

I've done the setup and when I close the door(s) I get a Open door L error on the bottom left side of the screen and a Closure MBDS error on the bottom right. Can anyone help me? Thank you!

[rickhunter]

Open door L is the logic door. Since you probably don't have a door on the mpu, there's a little switch right in the middle of the mpu on the bottom edge.  This switch moves to the right when the mpu door closes.  You can either use some electrical tape, bend in one side of it, make a hole to put the switch through it and attach tape to the right to force the switch in the "closed" position.  The other method is to disconnect the switch and make a jumper for the molex connector where the switch contacts are.

[YoEleven]

Thanks. It solved my problem. I used a hairtie to hold the lever in place

[rickhunter]

That's a better solution!  Never thought about using a hair tie.   

[iramack]

Rubber bands work well too..............

S

[Stayouttadabunker]

  YoEleven wins mod of the Covid year!