Grey and Grey/ Yellow  are both a logic ground according to the drawing.

That belongs to the power.

You'll need to check the voltage to the lamps.

Grey and Grey/ Yellow  are both a logic ground according to the drawing.

Hi, Mark:

Thanks for the encouragement!  I  think I can probably do it.  I remember my first jukebox, a Wurlitzer 2700.  After getting a good manual, it took me most of a month to learn the vernacular and the correct names of parts so the guys on the forum could help me.  I suspect this will be the same, and I am kind of dreading that, as memorization has never been my strong suit and is worse at 71.  Before I invest that kind of time, I really need some idea where I will be at financially.  Hopefully someone here can help me with a part number for the missing chassis and some idea what it should cost.  Looking at that 24 pin connector, I imagine it is something fairly complex.

Concerning the stand, I see what looks to be a coin chute that exits through the bottom of the machine.  Not knowing what it is for, I have to presume any stand will have to accommodate that, and whatever goes beneath it.

I'll wait to hear from the experts.  I'll be out of town until tomorrow evening.  I'll check my email then.

Best

Mike

Shortrackskater and I are both in “squirrel “ mode!
Let us see more.