25¢ Coin heads....
What a can of worms. I am trying to figure out what is the correct one for a S-Plus. Some have spikes on the back side, some are low on the top, Some are in different positions for the coin to drop left, right, center..

Good day!

Curious on how I can update a couple Canadian bill validators.
Three different machines
S+
S2000
and Bally S6000

1 x WBA-21-SS
2 x WBA-23-SS (One labeled 4 MEG on chip, other 1 MEG)

They were all flashed 10 years ago i believe, Friend of mine had me get these machine up and running but the bill acceptors will only accept older paper money vs the new fancy plastic.

Best way to go about this? Send them out to someone? Buy new Chips?

Although I am familiar with the main machines, I never got involved with bill acceptors, machines I bought came with USD ones i just removed them. Used free play..

Located in Ontario..

Thanks in advance.. I can head back out to machine to acquire more information if needed..

Steve




 

hi,

so I decided after a couple of weeks to have another look at the machine.

It seems that im missing 4,5 V on the door optic. No broken cable but no output on J19 Pins 3 and 4.

Could this have something todo with U79 that I have removed for example that U79 is still mandatory ?

Hope you can help a little bit so I get this one running.

Thanks

i did all you told me and the code 12 appeared agai as you can see. I will check the solderings to be sure.

How are the projects going?

Life also has me distracted from working on this.  Not enough hours in the day!!  Still plan to put this together when I have a chance. 

Does anybody out there have one of these already assembled and working they'd like to part with??