Need HOOKER - no not that kind, but the one that holds the cash tray. (Bally)

[shortrackskater]

Before I figured out how to get the free hooker, I did inquire at Rudys Deals. I think I sent a reasonable question. I've never had to buy a hooker  before. I'm not in the slot business - I don't know if there's a "standard." 

ME:
Hi
 I need one, or two. The description doesn't specify what brand. Will this fit for a Bally Game Maker or Bally Evo?
 Thanks
 mark

RUDYSDEALS:
Yes they are for the coin trays. If you see in the photo and match yours, That is it. Thank You,

Hmmm... Well um...I know they are for coin trays! So I sent another message back:

Hi
Thanks for the reply but... I know they are for coin trays. I wasn't sure if Bally, IGT, Sigma, etc were compatible.
What BRAND are they for? It's not stated in the listing.
 Thanks again!
 
I know they're good people there at Rudysdeals but am I dumb for asking clarification on a listing?
It's just a cheap hooker! 
Well, for now, I'll just stick with my free hooker... seems to be performing as it should, holding it up quite well. 

[shortrackskater]

deleted duplicate post...not sure how that happened.

[cowboygames]

I talked to John, might be over a year ago now, and he'd mentioned then that they were working on a real to sell the business. Never did hear if that came to pass or not...

[therockinelvis]

He has a couple ladies working also and they are not that knowledgeable of slots. I don't think he's going out of business, I just did a promotional video for him. Check it out on Facebook at Deals Rudys. They are definitely for IGT. Like I said I cut them down a little for the screws to work. I think longer screws would have been better but didn't feel like a trip to the hardware store for a For Sale machine.

[cowboygames]

I seem to remember IGT hookers being a little shorter than Bally hookers so, allowing for them both being a snug fit you'd probably be OK with the IGT hookers where they are more readily available and possibly more cost effective. I guess it just depends on how picky you are about your hookers.

On a side note, there seems to be some sexual innuendo associated with this topic, but I just can't put my finger on it

[Harvs]

I seem to remember IGT hookers being a little shorter than Bally hookers so, allowing for them both being a snug fit you'd probably be OK with the IGT hookers where they are more readily available and possibly more cost effective. I guess it just depends on how picky you are about your hookers.

On a side note, there seems to be some sexual innuendo associated with this topic, but I just can't put my finger on it

I thought we were just talking about what type of hookers people like to hold their trays?? Sexual innuendos?


Before I was married I was throwing my tray around like a feral ape, careless on possible permanent damage to my tray.., using all different types of hookers if I felt my tray needed it.. Ever since then I have stashed the hookers, and my tray is rarely even used. Luckily I still have a tray though, and not just a blank kickplate.

Now I just sit around staring at these TSETSE's and dongle, reminiscing about my first machine.. These WMS sure are expensive to keep up with!


What a hobby.........................................

[shortrackskater]

I seem to remember IGT hookers being a little shorter than Bally hookers so, allowing for them both being a snug fit you'd probably be OK with the IGT hookers where they are more readily available and possibly more cost effective. I guess it just depends on how picky you are about your hookers.

On a side note, there seems to be some sexual innuendo associated with this topic, but I just can't put my finger on it

I thought we were just talking about what type of hookers people like to hold their trays?? Sexual innuendos?


Before I was married I was throwing my tray around like a feral ape, careless on possible permanent damage to my tray.., using all different types of hookers if I felt my tray needed it.. Ever since then I have stashed the hookers, and my tray is rarely even used. Luckily I still have a tray though, and not just a blank kickplate.

Now I just sit around staring the these TSETSE's and dongle, reminiscing about my first machine.. These WMS sure are expensive to keep up with!


What a hobby.........................................

Short hookers, tall hookers... black, or otherwise... long as they're a good snug fit! Just as long as they keep the tray up and don't damage your dongle and tsetses!
Have we beat this horse to death yet? 

[Harvs]

I seem to remember IGT hookers being a little shorter than Bally hookers so, allowing for them both being a snug fit you'd probably be OK with the IGT hookers where they are more readily available and possibly more cost effective. I guess it just depends on how picky you are about your hookers.

On a side note, there seems to be some sexual innuendo associated with this topic, but I just can't put my finger on it

I thought we were just talking about what type of hookers people like to hold their trays?? Sexual innuendos?


Before I was married I was throwing my tray around like a feral ape, careless on possible permanent damage to my tray.., using all different types of hookers if I felt my tray needed it.. Ever since then I have stashed the hookers, and my tray is rarely even used. Luckily I still have a tray though, and not just a blank kickplate.

Now I just sit around staring the these TSETSE's and dongle, reminiscing about my first machine.. These WMS sure are expensive to keep up with!


What a hobby.........................................

Short hookers, tall hookers... black, or otherwise... long as they're a good snug fit! Just as long as they keep the tray up and don't damage your dongle and tsetses!
Have we beat this horse to death yet? 

We killed it!!!, Bravo!

[cowboygames]

We're all good, clear on the hookers works Just wanted to clarify that the question and problem where solved.

[Harvs]

We're all good, clear on the hookers works Just wanted to clarify that the question and problem where solved.

Seems to be solved.


The moral of the story..
If the hookers aren't holding your tray well, sometimes you have to do it yourself and make it work..,  like Shortrackskater did. Don't be shy, it's ok to take it into your own hands sometimes.., you don't always have to pay for the hookers..




And I'm out..