IGT S Slot (NOT S+) MPU needed....

[bwerner6632]

I need a good working MPU for an IGT S Slot (Again... NOT A S+).

[B-52BadByron]

Is the difference the metal housing that holds the MPU? 

[bwerner6632]

Is the difference the metal housing that holds the MPU?

Thanks for your reply!
Thats one difference. The other differences are that the wire harnesses to other parts of the machine are manually connected (Meaning you have to physically connect or disconnect each one (There are 3). There is just 1 chip or EEPROM that controls the Reels and Game functions as opposed to 2 for the S+. The volume control is on a dial-type mechanism on a S-Slot MPU as opposed to the blue rheostat (Not spelled right) on the S+. I am sure there are other differences, but these are the main ones. In other words, a S+ board cannot be modified by how it is attached to the cabinet and be used in an S-Slot.

[B-52BadByron]

Thanks for the info, sorry I can"t help with parts.