1
Bally Alpha Reel Games / Re: S9000 Alpha Stars & Bars QH - NVRAM Clear Failed - now machine boot failure
« Last post by rickhunter on Today at 01:42:19 AM »Would you have a spare MPU to try?
Welcome to the NewLifeGames.com message forum!
|
1
Bally Alpha Reel Games / Re: S9000 Alpha Stars & Bars QH - NVRAM Clear Failed - now machine boot failure« Last post by rickhunter on Today at 01:42:19 AM »Would you have a spare MPU to try?
2
Printers - ALL / Re: Need Help with Gen2 Netplex on IGT G20« Last post by PrairieTech on Today at 12:49:52 AM »Disclaimer: I work for a casino and know nothing about setting these up for home use. Our protocol is SerialSAS 1, Validation Style - Enhanced, and yes is marked for: Accept vouchers, print vouchers, validate handpays, SYSTEM SETTING:Accept vouchers, SYSTEM SETTING: Print vouchers, USE SYSTEM SETTING: Accept vouchers, USE SYSTEM SETTING print vouchers. the rest are marked no. You should be able to go intoSupport, Diagnostic, Device, Feature Self-Test, and select USBTicketPrinterFeature and it should say FL GEN2 NETPLEXPrinter ...Mine say FL GEN2 USB PRINTER:FL ...from there you should be able to test print. Now if it doesn't show up something is wrong.
3
Printers - ALL / Re: Need Help with Gen2 Netplex on IGT G20« Last post by PrairieTech on Today at 12:34:01 AM »Okay it's been a while since we ran Netplex on these, I think the only thing we still do is on Game Kings. As far as I know you don't hook up the USB if you are running Netplex(someone correct me if I'm wrong), and that Firmware would be GUN0010506. Now, if you are running it as USB then you would plug that in anywhere in the backplane up by the dongle and that Firmware would be GUU001A508. Like I said it was just easier to eliminate Netplex wherever we could. I can talk to some of the old timers tomorrow and see if they know anything about it. Good Luck!
4
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: IGT EKEY 7« Last post by PrairieTech on Today at 12:19:17 AM »Still have any of these?
5
Printers - ALL / Re: Need Help with Gen2 Netplex on IGT G20« Last post by sftechgeek on Today at 12:18:34 AM »Okay, I figured out that the wiring harness has a power, USB, and the 3 pin connector that doesn't get used. I am able to print a sample print with the firmware version on it. But that version doesn't appear in referenced documentation on NLG, version is GUHR119011.
Do I need to upgrade firmware on the printer? I am running AI014B0E OS, and that's the latest as far as I know. I know the USB does work because I will unplug/replug and the printer cycles and therefore is getting a signal to it. Does it make a difference were the USB is plugged in the PCB? I only moved it recently while trying to set up the printer. The tilt says something like device not found. But I'm wondering if the Validation style has something to do with it. I will try STANDARD and SYSTEM tomorrow. If I just set Print vouchers to "NO" everything is fine, but of course, then I don't take advantage of a ticket printer. Mechanically, I think the printer is fine. When I received the machine, less than a month ago, there was no paper in the printer and the printer was disabled. I didn't ask the original owner. But I just added TITO@HOME and BV portion works fine. The BV will read Bettor printed tickets too. I will check Voucher In/Out and Legacy Bouncing Advanced setups tomorrow. 6
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: ISO eKey07« Last post by PrairieTech on Today at 12:12:09 AM »I also need ekey 7, actually I need 3,4,5,7 and diagnostics if anyone can help?
7
LCD and CRT Monitor Repair Tech Support / Re: Ceronix 1492 Troubleshooting Help« Last post by PrairieTech on Today at 12:02:59 AM »Awesome! how does the CRT look? I'm very impressed with how far you had gotten it, and Chris is the man!
8
Printers - ALL / Re: Need Help with Gen2 Netplex on IGT G20« Last post by PrairieTech on Yesterday at 11:44:36 PM »You should be able to grab the unit and slide it forward, there is a release button (sliding tab) with a finger notch on the underside of the printer, you need to push towards the back of the printer, then it will slide the rest of the way and separate from the slide plate/mounting bracket. Not sure why your game is not seeing it though, could have lost the program. Put a ticket in and apply power while holding the feed and it will print you a ticket with the version on it. Sixcardmark's answers were all correct though, that is how all of our G20 printers are connected.
9
Printers - ALL / Re: Need Help with Gen2 Netplex on IGT G20« Last post by sixcardmark on Yesterday at 11:06:15 PM »It is not used.
10
Printers - ALL / Re: Need Help with Gen2 Netplex on IGT G20« Last post by sftechgeek on Yesterday at 10:11:32 PM »Okay, discovered one of the connectors on the harness is not connected. I could not figure out where it goes to. There's no dangling harness and I couldn't find an opening on the PCBs. Anybody have a G20 or G23 that can tell me where that connector goes?
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |