91
« Last post by cablegator on May 06, 2024, 03:20:44 PM »
Folks, I replaced battery, ran clear and key17 chip. still getting ram error. Is my board toast or is there something I'm missing? Its a 1952-0 model. Picture attached.
Thanks!
92
« Last post by David Walz on May 06, 2024, 03:17:27 PM »
I have some of the coin assembly parts that came in the mail. Also the reset key came in the mail. Encoder, coin block, coin acceptor bracket.
93
« Last post by Chris-socal on May 06, 2024, 02:58:27 PM »
Are you sure the clicking isn't the mechanical credits and payout meters?
94
just picked up a beautiful jeannie. I had a hopper and i wanted to make this coin in coin out. Having some trouble getting it the way i want but i dont even know if its possible. I would like it to pay out in coins from the hopper up to a certain amount. then i would like any amount over that value to add as credits. say 80 credits out hopper and anything over 80 to credits? is that possible. right now its coin in and credit mode. cant get creit mode to change even when i put split pay enabled. then when you cash out it goes out the hopper and not printer. i would like the cash out to be printer only if i can get it to pay out wins on hopper
95
« Last post by Wingnut1419 on May 06, 2024, 01:36:29 PM »
Hello, i just picked up a Bally System 5000 Slot machine and am trying to figure what type of machine i have and how to test the power supply.
Model # S33L33-00.
Any help would be appreciated.
Wingnut
96
« Last post by Wingnut1419 on May 06, 2024, 01:32:16 PM »
Hello, can someone please help me with my machine?
I just picked this up not working and would like help identifying this machine.
Also how would i test the Power Supply?
Thanks A lot
Wingnut
97
« Last post by cptdunsal on May 06, 2024, 01:12:08 PM »
I tried sensitivity control but I might try to play with that a little more. Any idea about the clicking, why it's not there anymore? You really can hear it when playing credits. It comes from the upper left. I'm guessing manual meters are up there? I want to thank you for helping me out.
98
« Last post by Newbooty on May 06, 2024, 12:37:49 PM »
This board has a chip on it that say 97%. Will the 00017 still work to change percentage? Can you tell me if this is for sure a 501 board? I am just going by what is written on it. Is there a definitive guide on how to identify MPU boards?
Thanks
99
« Last post by Badbaud on May 06, 2024, 11:32:43 AM »
Have you been adjusting the sensitivity control on the front box of the comparator? Considering the way the circuit is configured yo0u could prop the rake open with some folded paper and use it that way. In the F2 system the coin ion optic (or switch) do not communicate with the coin comparator. The comparator is only used to set the size of the coin.
100
« Last post by sccarlso on May 06, 2024, 10:59:36 AM »
Trying to get Ironman to work with a GamefieldxD screen but it just doesn't want to play nice. Newer OS's like H19.01 work perfectly on the machine. But ironman needs OS H18.02.
Bios NBOT-00003-2010 is listed for the specific game title: ME-WMS000055 WMS Iron Man S85E-000-1020 If I could flash my bios at least close to that rev, thinking it "might" address the issues.
If you have any older versions of NXT3.2 bios please PM
Thanks!
|