91
It looks like the grey wire from J2 position 2, goes to J13 #1 position?
92
« Last post by David Walz on May 17, 2024, 10:17:50 AM »
S5500
I can barely see the back side of the plug. That's the one that I need to reconfigure. Thank you.
93
May 17th - Price Reduced! - The buttons are sad that they don't have a new home yet! The 7 no image, but working buttons are still available. See below.
$16/button - 7 No image, but working $15 Shipping
If all 7 buttons are purchased together, I will drop the price to $112 shipped. PM me if you're interested.
94
« Last post by David Walz on May 17, 2024, 10:12:17 AM »
S5500
That band aid finger photo looks mighty familiar.
95
« Last post by David Walz on May 17, 2024, 10:10:35 AM »
Only difference I seen in your schematic is the BV reset button.
So my J16 harness is basically wired correctly.
97
« Last post by David Walz on May 17, 2024, 10:06:40 AM »
I don't have a V5500. But the BV wiring looks the same between my S5500 and my V7000.
Here's the S5500
98
« Last post by David Walz on May 17, 2024, 09:54:22 AM »
Let me check the wiring.
Then I will need to look at the backplane J16 wiring connector.
99
« Last post by sftechgeek on May 17, 2024, 09:50:28 AM »
Ahh, yes, I see the difference in the Crystal series. Basically the Crystal Dual looks like the G23 but runs Fam20 games? Did they do away with most of the physical buttons? So the screens are 27" and the topper can be a 3rd monitor?
That's quite a bit of $$$ to have a machine shipped up North. From Ohio to California it would cost me $400 for a pallet to be shipped.
Already received my HDD from RB which is a must have if you want those Fam14 resources.
Though the wife ain't too happy with my new found hobby, she's really going to flip when another machine ends up in the living room...
Thanks for sharing...
100
Only difference I seen in your schematic is the BV reset button.
|