Ainsworth A560 TITO Institution instructions
There are some criteria that need to be followed before your Tito will work in a A560.
(Disclaimer there may be shortcuts I am no expert at A560.)
I used Bettor Tito device WMS BB1/2 cable. These are the other items that you will need.
1. International base chip.
2. Epic 950 transact printer.
3. Mars bill validator.
It may work with other Printers and Validators but the above is my software and hardware.
Install your Tito board in the location that you desire and run your connection cable to the backplane I added a separate power source for the Tito board.
1.Install your Tito connection to (ACOM1) on the backplane.
2. You can do a Partial ram clear and start the configuration.
3. On photo that shows multi host configuration you will select yes on that screen.