Author Topic: S2000 triple lucky 7's issues (Read 17542 times)

Hogwild6161 · « **Reply #40 on:** July 30, 2016, 05:14:27 PM »

Quote from: 777sizzler on July 30, 2016, 04:59:26 PM

Push the white cherry switch in the bottom and see what happens-if nothing pull the stick all the way out-pull on it. This looks to be a machine that had player tracking wired and the owner did not know how to restore the wiring properly.

That switch?

777sizzler · « **Reply #41 on:** July 30, 2016, 05:16:26 PM »

Yes, The one in the bottom with metal bracket.

Hogwild6161 · « **Reply #42 on:** July 30, 2016, 05:24:07 PM »

I was able to push, and pull that switch. Had no idea you could do that. Even with it pulled out, it didn't change anything, when I hit the white mpu switch, with it pulled ouy, it is still saying the credits on the display.

Hogwild6161 · « **Reply #43 on:** July 30, 2016, 05:25:45 PM »

And yes, when it powers up, the reels go online, noise, etc.

Amechanic · « **Reply #44 on:** July 30, 2016, 05:28:42 PM »

Looks like someone wired the door optics together instead of using the door switch. The one white switch laying in the bottom looks like the switch that mounted on the back of the cash box housing. If the optics are hard wired it thinks the doors always closed, not allowing you to access the menus using the button on the MPU.

777sizzler · « **Reply #45 on:** July 30, 2016, 05:33:40 PM »

There are NO credits on the machine. Mess with toggles -it looks to be two of them-?. I would suggest that you restore this to orignal and avoid all this rigged up mess-Just my opinion. When you open and close the door the reels should spin and re-boot. If that is not happening you got nothing and cannot get to anything as far as menus etc. goes.

Hogwild6161 · « **Reply #46 on:** July 30, 2016, 05:36:48 PM »

I'm curious to know how anyone was able to put credits in the machine like this? Any suggestions on how to start getting this going? I had no idea that switch should be on the bv casing.

777sizzler · « **Reply #47 on:** July 30, 2016, 05:44:42 PM »

Proper switch selection as per the builder/rigger-It is just a on/off signal and the opto's pulse in milleseconds in the menu if you could get there you would and could verify with a on/off signal which is a 1 or 0 . (open/closed)

Hogwild6161 · « **Reply #48 on:** July 30, 2016, 05:54:47 PM »

I am going to try and toggle the switches every way I can, just to see if I can get it to work. If I want it put back the right way, it may more of a job than I can handle, but will try anything I can to see if it's possible.

777sizzler · « **Reply #49 on:** July 30, 2016, 06:00:06 PM »

Ok, Toggle those switches with the power-ON. The bottom switch I think is cash can box and should be normally closed-N/C -N/O stands for normally open.

qbert · « **Reply #50 on:** July 30, 2016, 06:20:14 PM »

Like sizzler said the white switch lying on the bottom pull it out and see if the VFD says door open. Let us know from there.

Hogwild6161 · « **Reply #51 on:** July 30, 2016, 06:23:42 PM »

Ok, toggled the cherry switch to closed, just taped it so it would stay down, hit the switch, and then hit the mpu switch. No changes. Now I have it where the cherry switch is pulled completely out, hit the mpu button, and still nothing. The toggle switch I hit, regardless of NC or no, always pops on the attendant light as well.

Hogwild6161 · « **Reply #52 on:** July 30, 2016, 06:26:02 PM »

Pulled out switch, and it didn't change the vfd at all.

qbert · « **Reply #53 on:** July 30, 2016, 06:53:20 PM »

OK we need to get your door switch working since the optics have been removed, there is a way to bypass them with the cherry switch.
Let me explain the cherry switch operation this will help you. It is spring loaded as you have noticed, If you push it in and hold that does the same thing electronically as when you pull it out so you will be working for now as either pulled out or relaxed in the middle position.

Study this link from the old site and see if it makes any sense with the colors of the wires you have.
The old optics had two wires going to the door and two wires in the cabinet (two for each optic one in the door and one in the cab)
Since your machine already has some sort of bypass done be careful identifying the correct wires.
http://newlifegames.net/nlg/index.php?topic=8683.0
There is a picture in the link that should help you .
Post back with questions before you try turning on

Hogwild6161 · « **Reply #54 on:** July 30, 2016, 07:23:08 PM »

Thank you, my friend. In the top pic at the top page of page 3, on this thread, there is a red and green wire, that goes from the door, to thelp side of the machine, by the door handle. I can only assume that is the door optics?

Amechanic · « **Reply #55 on:** July 30, 2016, 07:30:09 PM »

If this were mine I would disconnect either the red or green wire that's running just under the front of the reels to see if I could get the machine to think the optics are open. It looks like someone has pulled the door wires and cut and crimped them together thinking they could by pass the optics that way.

qbert · « **Reply #56 on:** July 30, 2016, 07:46:49 PM »

Need a picture of where that wire set goes. Then we need to find the one's that went to the door optics

Hogwild6161 · « **Reply #57 on:** July 30, 2016, 08:01:29 PM »

Ok, I just unplugged the optics from the door, to the hinge, and finally see the auto config. I hit the button, and Bill validator not responding, ticket printer not responding as well. Here are some pics of the wiring.

qbert · « **Reply #58 on:** July 30, 2016, 08:09:37 PM »

Ok for now just reconnect and disconnect that a few times as the MPU will stack errors and must be cleared individually.

Hogwild6161 · « **Reply #59 on:** July 30, 2016, 08:27:08 PM »

I unconnected and reconnected multiple times, can you help me out with the next step? Do I unplug again, and try autoconfig again? Thank you, sir.

News:

NLG Site Navigation Menu

Author Topic: S2000 triple lucky 7's issues (Read 17542 times)