OK everyone! I've replaced both my bill validator and the transporter and am still having the same issues with the machine. Both new units work in another machine. The bezel will not light in a normal working mode - unless the BV is set-up incorrectly and then it will flash. However, what I have noticed is that both the BV and the transporter will cycle when I "adjust" some of the wires coming into that area. Could there be a wiring issue causing these things to not work? Also, at the top of the machine behind the glass, there appears to be a black power box. It also says that it has been "repaired" previously. Can someone provide insight if that black box or the wiring could be the culprit? Also, how do I go about removing the top glass? The self-test is picking up the BV, but there doesn't seem to be reliable power going to the transporter and/or the bezel.
Thanks,
~ Justin