IGT I game power supply connector pin out/schematic???

[Blythe1566]

Hello all,


Putting an early I game back together and need a pin out for the power supply connector.  Mine was cut off and I have a replacement harness from a S2000 machine but they are different.  My harness containes 13 wires of the red orange black variety and 3 of the brown green blue.  The s2000 harness only contains 11 /3.  I plan to patch the connector onto my harness but need a pin out or picture of the correct wire placement.  Here is a pic of the S 2000 connector and my cut harness.  I'm looking for a pic of the I game connector like this and/or actual schematics would be great!Help please!!

[Tilt]

Here's power supply wiring diagrams for both I-game and S2000.  That should help you get it sorted out. 

[Blythe1566]

Thank you so much for these!  I now can move onto the next problem....  old crt monitor does nothing !!!  Are there any tricks to resurrecting them even if it's just temporary??  The machine seems properly powered up now, Tito is flashing and I get a proper alarm when opening the cab, just no screen so no way to tell what's up.  All board LEDs are amber in color currently

[Tilt]

Glad they helped!  I've never had very much luck repairing CRT monitors, so I usually just replace them with LCDs.  Hopefully someone will chime in with some suggestions to help you get it fixed though.