wba 10 doesnt initialize

[puckhead]

wba10 in an igt i game video.  doesnt intitalize, no leds by the dips.  gets 13v to the unit.  here is what i noticed. disconnecting  the 5 wire connector in the pic allows it to spin up and i get one led by the dips. hook it up, its dead?   see pic
thanks

[RB]

Did this unit ever work in the machine? Sounds like you have a comm issue indicating the WBA CPU board is either the wrong protocol or bad. All dips should be in the off position for normal operation.

[puckhead]

not sure if this is best for the bill validator forum or the i game forum.  i now have 2 leds lit on the bill acceptor. all dips off. i do a nexplex auto config, i hear it cycle,  and it says installed. still doesnt work, or cycle on start up.  if i try to read the crc, i get an error, no crc . if i clear the error, redo the auto netplex, i still get no crc. its a wba-10-ss , USA-601-24  . hand written stickers says ido 24 v 3.00  .  is it a config error in another menu, SAS or some other?

thanks

[rickhunter]

Just because the sticker says ido 24 v 3.00 doesn't mean that is what is on the unit.  A lot of times dealer overwrite the firmware and don't write it down.  It sounds like you have a com error.  WBA 10's a crap anyway, you should be using at least a 12/13 since the 10's don't accept all the newer colored bills.

[puckhead]

somehow magically, it started working. did nothing. lets see hoe long it lasts

thanks