Author Topic: Cg1 and cg2 on a 44 board (Read 2170 times)

Myfairlady · « **on:** December 21, 2020, 11:39:04 AM »

Hi. Are cg1 and cg2 to be inserted in Audio 1 and audio 2 spaces ? If not where are they supposed to be put? Thank you

sixcardmark · « **Reply #1 on:** December 21, 2020, 11:49:27 AM »

Need pics of what you are talking about. 044 boards have neither. Do you have an adapter board on a 044 board to use 3209 games? Never put sounds chips in cgf sockets or vice versa.

Myfairlady · « **Reply #2 on:** December 21, 2020, 11:52:32 AM »

The original game is Alien. It has an enhanced board.

Myfairlady · « **Reply #3 on:** December 21, 2020, 12:20:37 PM »

Cannot post a picture, the file is too big...

sixcardmark · « **Reply #4 on:** December 21, 2020, 12:27:44 PM »

Take pics with cell phone, resize and email to yourself.

Myfairlady · « **Reply #5 on:** December 21, 2020, 12:42:36 PM »

Tilt · « **Reply #6 on:** December 21, 2020, 04:09:31 PM »

Picture filesizes must be under 1MB to post. Resize as necessary to get it under that.

From what you've said so for it sounds like you have an 044 board with a legacy adapter board to put the Alien game on? Problem is Alien doesn't have CG1 or CG2 EPROMs, it has an 8MB CGF SIMM card. It sounds like maybe your software set is mismatched? Try to repost pictures of the MPU board and the software set you're trying to install with pictures clear enough that we can see the numbers on the chips if they have any.

Myfairlady · « **Reply #7 on:** December 21, 2020, 04:23:08 PM »

To make thing clearer I should have asked if it was possible to use 039 poker set chips on a 044 enhanced board.

Tilt · « **Reply #8 on:** December 21, 2020, 04:48:18 PM »

Sorry I misread your post. To answer your question though, yes you can run 3902 poker sets on a 044 MPU with a legacy adapter board. The legacy adapter board supports older all EPROM based games as well as EPROM and SIMM games.

Myfairlady · « **Reply #9 on:** December 22, 2020, 12:11:52 AM »

Hi, the legacy adapter board is where the base eprom is I suppose. It is a real pity I cannot post my picture.

Myfairlady · « **Reply #10 on:** December 22, 2020, 03:34:39 AM »

Here it is

Myfairlady · « **Reply #11 on:** December 22, 2020, 03:36:30 AM »

This is the enhanced board with the AlÃen game.

RB · « **Reply #12 on:** December 22, 2020, 04:54:21 AM »

If you wish to install software that uses CG proms, remove the current software & install them here. The sockets are marked CG1 & CG2.

Myfairlady · « **Reply #13 on:** December 22, 2020, 05:00:20 AM »

Hi. Thank you! Shall I leave the Dsp chip on? 👍🏻

RB · « **Reply #14 on:** December 22, 2020, 05:01:12 AM »

Yes, It is required.

Myfairlady · « **Reply #15 on:** December 22, 2020, 05:23:17 AM »

Thank you for your help.👍🏻

Tacman · « **Reply #16 on:** December 22, 2020, 07:15:05 AM »

Also, I remember a slot guru that is no longer with us (BlueRidge) that international versions of the software will not work in a legacy board. If that is a problem you are experiencing.

Dan (Tacman)

Myfairlady · « **Reply #17 on:** December 22, 2020, 07:32:02 AM »

I do remember Blueridge. I will let you know what happens.

Ken · « **Reply #18 on:** December 22, 2020, 08:29:59 AM »

I have this game king memory board with Alien on it but don't remember if the 044 MPU needs a varta battery on it or not.

Base I0000949
CGF C0000787
GME 1 G0002203
GME 2 G0002203
PXLF3 C0000787
PXLF4 C0000787
PXLF5 C0000787
SNDF DSS00213

Myfairlady · « **Reply #19 on:** December 23, 2020, 02:09:09 PM »

Will key 17 work ?

News:

NLG Site Navigation Menu

Author Topic: Cg1 and cg2 on a 44 board (Read 2170 times)