Yes, you could just set a printer on the top of the machine and use it that way if you want to. You may have to make some custom cables to reach the netplex and power connections it requires though.
Sorry to revive old thread, but now that I have the TITO board and a printer, I'm diving deeper into how to set it all up. I got the FutureLogic Gen2 printer, and from what I've read, I only need to connect the Netplex molex (power and comms are shared through that single connection) is that correct? Anyway, I'm not sure where to connect it, as most guides reference a netplex distribution board in the top box, which I obviously don't have. There is an open 8-pin molex connector on the backplane, but I can't find into online (even in the NLG File System) to confirm that it is actually a Netplex connector. It is marked as "J12" on the board. Can you offer advice? Thanks!