91
« Last post by mboessen on May 19, 2024, 05:57:52 PM »
Indeed. Presuming the first step of the journey, IE obtaining the missing chassis, is successful, the second step is I will order a book. Hopefully I can find an original or very good copy. Then comes the part I dread, IE learning the vernacular, and memorizing the correct names of a thousand parts so you guys can actually help me, and then memorizing the sequence of operation. Boy am I dreading all of that. Probably Tuesday before I am back on here.
92
Okay... so now I'm facing something I did not expect.
I went into the I/O test like Stayouttadabunker mentioned and tested all the buttons on the button panel... and every button works NORMAL. The tests on each button show a successful button press, even after pressing the button practically back-to-back. Of course, rapid back-to-back presses don't always trigger a response, but all buttons are actually very responsive.
So... the tests are showing the buttons working fine. Doesn't seem like anything is actually wrong here based on the tests, however, the test behavior is not the same behavior like I've been saying this whole time.
I'm attaching a picture of the MPU board from this machine. Is it possible that some chip in particular is enforcing something in regards to the space between button presses or something? It's a Top Dollar 2CM $50.
My other S2000 Hundred or Nothing works beautifully and is very responsive. I just don't understand this.
93
« Last post by Badbaud on May 19, 2024, 05:48:03 PM »
The journey continues.
94
« Last post by Bmwsyc on May 19, 2024, 05:06:56 PM »
Pictures are hard.
95
« Last post by Bmwsyc on May 19, 2024, 04:56:24 PM »
As pictured, looking for some replacements.
96
« Last post by Bmwsyc on May 19, 2024, 04:47:40 PM »
A little update. I brought the machine to Worldwide Gaming, which is nearby and had them look at the machine. It did turn out to be some magical combination of settings that they figured out during the clearing process. They also updated my bill acceptor and replaced the stacker. All is working great now, just need to replace the candle and clean it up.
Thanks all for the help
97
« Last post by leocat168 on May 19, 2024, 04:35:59 PM »
Hi went into the menu and see pictures below for what are errors Weird that one time I turned in the game the reels showed up. But not again since Help.... Thanks Al
98
« Last post by mboessen on May 19, 2024, 03:32:53 PM »
OK. That explains the hole in the bottom. I can see below the handle where the plate used to be. Can't see any magic marker. Some time in the next few days I'll pull the chassis with the reels on it and see if I can obtain some numbers. I presume this is necessary to determine what "coin hopper" I need?
99
« Last post by Pitts256 on May 19, 2024, 03:28:00 PM »
So with the door open lock the key switch, the lever blocks the photo eye and the LED goes out.
Then pull the cherry switch out to the detent position.
Does the green light come on for the coin comparitor?
100
« Last post by gunnerbill on May 19, 2024, 02:25:38 PM »
Bally A2 Pro 22-32 Titanic
Game Loaded is "Titanic" -CPU is a Bally A2 231. Light, home use only. -MEI BV, -Gen2 Universal Printer, -TITO, -Bally sound chair. Has 5.1 sound card with Sound AMP, Chair is in Great condition -LCU Card is AO8, -LED Speakers. -Large Super Video Topper
Machine, Cabinet, Displays, all original, and in great condition. The Emotive lighting enhanced Super topper & LED Speakers; cabinet, complete and operational for Home use.
Weight: 375 lbs. (174.633 kg) plus the chair Height with Topper and Tower Light: 85" (2159 mm) Width top monitor: 34" (864 mm) Depth top monitor: 25" (635 mm) Base depth: 24.0" (610 mm) depth from button deck: 24.5" (623 mm) Overall depth at base: 16.5" (420 mm)
|