Hi all --
I wasn't sure if I should post this in this forum or in the DBV area, but I'll try here first since I don't think the problem is the bill validator.
I believe that I had seen some discussion in the past regarding the same or similar problem, but I cannot find it now.
The JCM DBV and stacker work just fine. Bills are accepted and stacked neatly in the can.
However, there are no credits registered on the machine.
I have swapped:
- The bill validator (2 other units), same result.
- The MPU board. (Both boards work just fine in another Game Maker and accept bills.)
I am guessing it's some kind of communication issue between the DBV and the MPU or backplane.
Does anyone have any suggestions on what to try next?
Thank you for reading this!
E
***UPDATE***
I swapped out the head and changed the DIP switch 10 setting, sprayed contact cleaner on all the connectors, and reconnected everything. That did the trick.