71
Bally Alpha Reel Games / Re: bally alpha small screen touch not working
« Last post by armyaviation on May 14, 2024, 08:56:15 PM »I think they are different but I will check thanks
Welcome to the NewLifeGames.com message forum!
|
71
Bally Alpha Reel Games / Re: bally alpha small screen touch not working« Last post by armyaviation on May 14, 2024, 08:56:15 PM »I think they are different but I will check thanks
72
Bally Alpha Reel Games / Re: bally alpha small screen touch not working« Last post by Jolly Rock on May 14, 2024, 08:50:18 PM »You need to take the cover plate off to see where the cables were connected. At least that is where my problem was (a very loose and poor connection).
73
Bally Alpha Reel Games / Re: bally alpha small screen touch not working« Last post by Jolly Rock on May 14, 2024, 08:46:44 PM »The picture shows where I found my loose usb connection. It is like an extension cable connected with a male and female usb cord that goes to the monitor.
74
Bally Alpha Reel Games / Re: bally alpha small screen touch not working« Last post by Jolly Rock on May 14, 2024, 08:44:35 PM »There is a cover plate over some cables on the back of the door right behind and below the lower touch screen monito.
75
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by RobinAK on May 14, 2024, 08:22:47 PM »With SP1271 you can set credit and hopper limits separately, that's the one I use. I like the SP1271 chip also. Here is link for settings using the 1271. http://newlifegames.com/nlg/index.php?topic=514.0[/url NLG Member RB is the man for chips. 76
Bally Alpha Reel Games / Re: bally alpha small screen touch not working« Last post by armyaviation on May 14, 2024, 08:19:05 PM »my screen doesnt use a usb. i understand what you are getting at. does this pic help? are you referring to something somewhere else, thanks
77
Bally Alpha Reel Games / Re: bally alpha small screen touch not working« Last post by Jolly Rock on May 14, 2024, 08:16:22 PM »Re: cover plate on back side of door, it’s held on by ( 2) 5 mm (if I remember right nuts…. NOT screw. Sorry
78
Printers - ALL / Re: Printer head up error on s2000« Last post by armyaviation on May 14, 2024, 08:14:18 PM »That’s what I was trying to explain above, i swapped the cable and the actual printer in different times, the cable that in there now works with one and not the other
79
Bally Alpha Reel Games / Re: bally alpha small screen touch not working« Last post by Jolly Rock on May 14, 2024, 08:09:47 PM »Hi, Had a similar problem with my S9000. There is a metal plate protecting the wires on the door behind the lower monitor. The USB cable to this lower touch screen monitor bbehind this plate has a USB male and female connection. Loose connection was helped by slightly bending in the plug to create a much tighter connection. Seems to have cured the problem. The cover plate is held on by 2 screws. Hope this helps.
80
Printers - ALL / Re: Printer head up error on s2000« Last post by Stayouttadabunker on May 14, 2024, 08:02:34 PM »Swap the ribbon cable to test?
If it works, then you just need a ribbon cable. |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |