Author Topic: RGB LED strips to replace florescent bulbs. (Read 560 times)

xwarp · « **on:** January 26, 2020, 10:20:02 AM »

Finally did something about the bad bulbs. Wasn't interested in replacing them since I had the LED strips laying unused.

Enjoy!

https://www.youtube.com/watch?v=hzm1-7PYLMw

Dirtguy · « **Reply #1 on:** January 26, 2020, 11:31:27 AM »

Really Cool! There are a lot of different LED Strips on Feebay, what type ( voltage, connecters) did you use to get that setup?

xwarp · « **Reply #2 on:** January 26, 2020, 02:27:45 PM »

I used strips that are powered by their own supply that plugs into an outlet in the slant top I have.

If you have an outlet in your machine, you can use strips that have their own supply.

In thing I might suggest is looking for LED strips that are in sections so that you can join sections with the extensions.

I'll look and see what I can find and post them.

bogan · « **Reply #3 on:** January 26, 2020, 04:10:10 PM »

I have done a similar thing with 24V white LED strip. I just cable tie it to the old fluro tube then wire it into the existing power input to the fluro balast.

News:

NLG Site Navigation Menu

Author Topic: RGB LED strips to replace florescent bulbs. (Read 560 times)

xwarp

RGB LED strips to replace florescent bulbs.

Dirtguy

Re: RGB LED strips to replace florescent bulbs.

xwarp

Re: RGB LED strips to replace florescent bulbs.

bogan

Re: RGB LED strips to replace florescent bulbs.