Author Topic: S2000 triple lucky 7's issues (Read 17560 times)

cowboygames · « **Reply #20 on:** July 30, 2016, 03:17:45 PM »

The way he was describing it I think he's getting as far as he is using the attendent menus from the jackpot reset key

Hogwild6161 · « **Reply #21 on:** July 30, 2016, 03:54:49 PM »

When you say dip switches on the side of the bv, where would those be located at? On the actual bv, after taking it out of the machine completely, or the bv still inside the housing of the machine? I took the bv out and am looking.

qbert · « **Reply #22 on:** July 30, 2016, 03:55:53 PM »

Ah yes you are correct those menus will not come up using the jackpot key you must access via the MPU button to get to 4.2 and 4.3

qbert · « **Reply #23 on:** July 30, 2016, 03:58:22 PM »

When you pull the bv out look at the right side towards the bottom front there should be a set of dip switches. Make sure they are up.

qbert · « **Reply #24 on:** July 30, 2016, 04:01:50 PM »

Was this a Craig's list or eBay purchase? Have you seen this machine working before you purchased it?

Hogwild6161 · « **Reply #25 on:** July 30, 2016, 04:06:18 PM »

All dip switches were up, and no, not a Craigslist or eBay buy, or I would have been asking for a refund! It was given to me by someone who knew less about slot machines than I do!

qbert · « **Reply #26 on:** July 30, 2016, 04:11:41 PM »

Just trying to establish origin of the machine, don't be offended. So you got this from a home owner so I would assume it worked at some point in time.
IE : not mixed parts thrown together by someone to make a quick sale

Hogwild6161 · « **Reply #27 on:** July 30, 2016, 04:25:07 PM »

Not offended at all, you have no idea how much I appreciate you helping out with this. There are a couple of weird things on it, since you mentioned piecing together. I do have the reset key, but it doesn't do a thing when I flip it. Also, there is a toggle switch on the inside, that I have to hit, to get the attendant light to come on, and then go into the testing. Should that be happening? Almost looks like someone did it as a bypass switch, but the wiring looks perfectly done.

qbert · « **Reply #28 on:** July 30, 2016, 04:29:26 PM »

Some type of bypass has been done. We need pictures.
Ok try this when you open the door and get the switch to turn on the attendant light then press the button on the MPU and see if something happens.

Hogwild6161 · « **Reply #29 on:** July 30, 2016, 04:35:34 PM »

That is the toggle switch.

qbert · « **Reply #30 on:** July 30, 2016, 04:40:34 PM »

Strange need more pictures back up and get a shot with the door open of the whole interior

Hogwild6161 · « **Reply #31 on:** July 30, 2016, 04:44:18 PM »

Another one.

qbert · « **Reply #32 on:** July 30, 2016, 04:47:56 PM »

When you lift the latch on the door does the video display change or does it stay reading the insert coins etc.

777sizzler · « **Reply #33 on:** July 30, 2016, 04:49:01 PM »

Read this thread, This machine is hacked and rigged-So you have to figure out what the rigger did!. Not a normal fix. As many pics as possible will be more useful than anything.

Hogwild6161 · « **Reply #34 on:** July 30, 2016, 04:49:14 PM »

One that is all of the inside.

Hogwild6161 · « **Reply #35 on:** July 30, 2016, 04:51:08 PM »

Another.

Hogwild6161 · « **Reply #36 on:** July 30, 2016, 04:53:36 PM »

The video display doesn't change at all when lifting the door latch.

777sizzler · « **Reply #37 on:** July 30, 2016, 04:59:26 PM »

Push the white cherry switch in the bottom and see what happens-if nothing pull the stick all the way out-pull on it. This looks to be a machine that had player tracking wired and the owner did not know how to restore the wiring properly.

Hogwild6161 · « **Reply #38 on:** July 30, 2016, 05:11:20 PM »

A few more.

777sizzler · « **Reply #39 on:** July 30, 2016, 05:12:08 PM »

Also, For the machine to re-boot it has to see a door open-then closed. If the optics have been by-passed this may explain that. You have to have a "door-open" to properly use the mpu white toggle. Does the bv spool up and make all that noise from power to on?. The machine is on line but cannot accept credits because it has been by-passed and fooled.

News:

NLG Site Navigation Menu

Author Topic: S2000 triple lucky 7's issues (Read 17560 times)