1
IGT S2000 and Vision Games / Re: IGTS2000 10x Times Pay
« Last post by shortrackskater on Today at 08:12:26 AM »Moved to IGT S2000
~moderator
~moderator
Welcome to the NewLifeGames.com message forum!
|
1
IGT S2000 and Vision Games / Re: IGTS2000 10x Times Pay« Last post by shortrackskater on Today at 08:12:26 AM »Moved to IGT S2000
~moderator 2
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Need high percentage game chip for a Bally 6000 Beach Party slot« Last post by ucanwin on Today at 08:05:34 AM »Looking for a high percentage game chip for a Bally 6000 Beach Party slot.
3
WMS Williams Video / Re: Hello everyone! First WMS slot!« Last post by 474lsa on Today at 08:01:03 AM »China shores is also available on the much cheaper k2v platform.
4
IGT I-Game and Game King / Re: Help on my GameKing issue« Last post by RB on Today at 07:39:15 AM »Check the ac cord to be sure it's securely connected to the distribution box. Also check the main power supply to be sure it is properly seated and screwed in. Many times it has just slid out of the connector because someone was to lazy to tighten the thumbscrew.
5
IGT S2000 and Vision Games / Re: Accepting tickets on machines with different accounting denominations« Last post by dailey on Today at 07:34:49 AM »I have the same issue with my machines. My machines which are set to $0.01 accounting denomination will accept all tickets. My machine which has an accounting denomination of $0.25 will only accept tickets which are evenly divisible by $0.25 For example it will accept a ticket of $10.25, but will reject a ticket for $10.26
The only solution I know is to set all machines to $0.01 accounting denomination, unless there is some menu solution I'm unaware of. 6
IGT I-Game and Game King / Help on my GameKing issue« Last post by jimhowardjr on Today at 07:08:09 AM »Hi All,
I was hoping someone could point me in the right direction in trying to figure out what I did to my machine. My GameKing machine was working fine until i tried to move it. I had it temporarily on top of a milk crate as I was redoing the floor on my finished side of the basement. When I was taking the working slot machine down from the milk crate, it slid off the end and the bottom hit the floor pretty hard. I moved the machine back to it original location and plugged it in...no lights lit and nothing showed up on the screen when I turned it back on. When I shut the machine off, I did see the screen flicker as can be seen in the video link below (a link on one drive since the video file is too big to attach). https://1drv.ms/v/c/71127d7e5bb5279a/ETTNnG9PapFDv6CGm1fySLUBrAY3AUG37An7Qx2MPpg_lg?e=pyMDL4 Any help would be appreciated. Thanks, Jim 7
IGT S2000 and Vision Games / IGTS2000 10x Times Pay« Last post by hipkiss on Today at 06:18:33 AM »Hello from Paris.
We'll be in NYC next week and need advises for you "the team" ! I'll have to replace the Pull Handle mechanism, I can find one on worldwide-gaming. But "Houston, I have a problem," when I switch off the slot machine, I lost all the previous settings of the multimedia "chips/board". Do I have to change the green big battery "B2" on the board ? Now the voltage is about 15.1 mV. What is the ref, need to find one ? I put a global picture of the main board, do you know if there is a fun upgrade to do regarding the chip version I have ? Thank you. 8
Universal Reel/Video Games / Re: Universal (pacific) RAM clear« Last post by UNIMAN on Today at 06:02:36 AM »Nobody here has had any luck with the 8600 board.
And never heard of those instructions or ever seen a manual. Not sure it would matter which side of the reset switch to connect to. Give it a try. 9
WMS Williams Video / Re: Hello everyone! First WMS slot!« Last post by Chris-socal on Today at 05:48:34 AM »Welcome to NLG. Enjoy your new machine.
Sounds like you will be looking for a Konami kp3 soon! Keep us posted. Chris 10
Universal Reel/Video Games / Re: #12 error?« Last post by UNIMAN on Today at 05:46:54 AM »Yes, that black button on mpu is the reset. You can also try the yellow reset at top right corner of the open door after leaving it on for a minute.
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |