Author Topic: Bally 809 5 coin multiplier (Read 41821 times)

mark the spark · « **Reply #200 on:** October 27, 2018, 11:39:03 AM »

Has the hopper reset are the fingers on the payout at 6oclock

Tat2Dave · « **Reply #201 on:** October 27, 2018, 12:52:32 PM »

yes, the fingers are at 6 o'clock. And not sure if the hopper has reset?

mark the spark · « **Reply #202 on:** October 27, 2018, 03:14:11 PM »

The fingers on the hopper need to be at the bottom there is a plunger behind the board press it in to reset it those fingers do not look like they have returned to zero
If they have not returned everything will come to a stop no payout

Tat2Dave · « **Reply #203 on:** October 27, 2018, 06:23:55 PM »

I did that and the fingers were at 6 o'clock, I spun the reels and stopped them on 3 watermelons, the hopper started humming likje it wanted to pay out, and then it shut down, like kit's done before.

mark the spark · « **Reply #204 on:** October 28, 2018, 12:45:48 AM »

Can you post a nice clear photo of the hopper as is now want a picture of all of the board and those fingers and your zero switch

Tat2Dave · « **Reply #205 on:** October 28, 2018, 09:44:54 AM »

The problem is my slot machine won't accept nickles, I'm trying to take care of that first. If the people that were helping me don't wont to help anymore, then i guess I don't need to be on here for help? Thank you again to the people who were helping and that I trusted with there help.

Tat2Dave · « **Reply #206 on:** October 28, 2018, 10:04:08 AM »

Can someone please tell me if this is true? ( Inside the door of your slot machine will be a coin comparitor that holds a coin. That coin is there for a reason, it's not jammed. The machine compares every coin that is dropped in the coin slot to whatever coin is dropped in. If it is removed your slot machine will not work.)

?

sixcardmark · « **Reply #207 on:** October 28, 2018, 10:09:12 AM »

TRUE - It will not take coins if you remove the coin to compare.

mark the spark · « **Reply #208 on:** October 28, 2018, 10:33:28 AM »

You do not have a coin comparator your machine is all interlinked a problem in one part affects everything as old Reno used to say the hopper is the brains of the machine you should play it on 1coin till it works then worry about multiple coins
It's very difficult to diagnose via the internet so bear with us now post a photo of the hopper as is of the hopper board so we can see the fingers and zero stop

sixcardmark · « **Reply #209 on:** October 28, 2018, 10:37:33 AM »

Hehe didn't notice this was E.M. machine = coin mech.

DavidLee · « **Reply #210 on:** October 28, 2018, 11:58:18 AM »

If I understood your question.
There is no coin in the coin mechanism for comparison.
If there is most likely its jammed. This most likely would interfere and cause a malfunction.

Tat2Dave · « **Reply #211 on:** October 28, 2018, 12:28:39 PM »

Central Valley Slots had tips and info for slot owners, and they said something about don't take the coin out of the coin coparator. So i was asking a question, because I don't know. If you don't know, you should ask questions, right? I don't know where or what zero stop is?

Tat2Dave · « **Reply #212 on:** October 28, 2018, 12:29:38 PM »

More pictures

mark the spark · « **Reply #213 on:** October 28, 2018, 12:59:00 PM »

These machines are hard to work on so it's one step at a time you r there we r not
Just so we are clear .forget the extra lines treat it as a single coin which means resetting the top features so pull out the top feature and press the reset plungers /coils so all is reset
Do the same with the hopper the coil/plunger is behind the payout board do not worry if nothing happens when pressing resets
Everything should now be reset
Insert 1 coin does the handle release
Did the reels spin
If yes insert coin and set up a win
Did it pay out

Amechanic · « **Reply #214 on:** October 28, 2018, 01:41:50 PM »

From this picture your hopper spiral cam in not resetting all the way back to Zero. The zero switch contact needs to be opened. The wiper fingers on the spiral cam should end up to the left side of the 2 coin payout contact pad on the hoppers wiper board.

Tat2Dave · « **Reply #215 on:** October 28, 2018, 09:04:29 PM »

Thank you

mark the spark · « **Reply #216 on:** October 28, 2018, 11:44:48 PM »

Does thank you mean it's working ?

Denmark · « **Reply #217 on:** October 29, 2018, 01:49:13 AM »

the spiral cam cant move any further ,cause its reached the end (probably a 100 coin pay) ,either the carrigde is mounted wrong or the cam wont reset - chek Old Renos how to clean the hopperdisc sticky - and reesembly...

Hans

mark the spark · « **Reply #218 on:** October 29, 2018, 06:22:53 AM »

Ok tatdave u need to press the plunger in on the coil that sits on the base behind this board of it is sitting at a pay it will reset to zero
Or if nothing happens u can manually advance the fingers then reset this can all be done with the hopper out the machine
By manually advancing the fingers and resetting the fingers should be sat just before the 2 and your zero switch should be open
Perhaps posting another photo after you have done this

Tat2Dave · « **Reply #219 on:** October 29, 2018, 05:55:13 PM »

I pressed this plunger on the top shelf. I pressed this plunger behind the disk.

News:

NLG Site Navigation Menu

Author Topic: Bally 809 5 coin multiplier (Read 41821 times)