bally 6000 safe ram clear problem maybe some one can help with problem

[trashman]

i did the safe ram clear and now i have these codes.i turn game on and off and display number went down one.also all the lights are flashing. here is a pics thank you

[Badbaud]

The power supply voltage is low, check the voltages, there is a adjustment inside the power supply to set the 5V to 5.16V as Bally recommended.
If you can't get the voltage up then you need a new module. There is a sticky on NLG on how to repair your own.
See attached for info on voltages and where to test.

[trashman]

thank you i will look into that tomarrow

[pbwizard25]

Check battery voltage.

[trashman]

ok so i turned game on today got code 88 again so i checked battery voltage 2.4 because they used this crazy battery holder.well i put the right battery in and did the safe ram again now this is whats in my display.is this normal , is the coin conspirator bad.coin just fall through,or should i do the voltage test thanks

[clading]

On the Bally 5500, a decimal point in win/paid first position means a system reset has occurred not due to a malfunction. A decimal point in the second position means door was opened. I think both would clear after a spin but seems like your comparator is not working right. Check the coin and make sure it's the correct one and that it's seated correctly in the comparator.

[Badbaud]

Make sure that small switch just to the right of the test button is in the UP position or the coin comparator won't work.

[trashman]

THANK YOU ! that was the problem.i have hopper issues , but i ask about in the future thanks again everyone.