button panel tilt and board monitor tilt??

[tncrny]

I was able to clear temporarily by restarting but now it just comes back up. Please any info would be great

[Melissarmdlm]

Those are separate tilts.
To clear the BMT open and close the M door...Of course it'll return unless corrected. If your machine does not have a system health option in the menu you'll need to access it in BIOS. To access BIOS, install a keyboard, and tap delete on the keyboard during bootup repeatedly. When it asks for a password: sevens From there use the PC health screen in BIOS to determine the problem and correct it.
To clear the BPT diagnose and fix the buttons, then reboot. If looking at the OLED type, they should sequentially read 0-9 at first power, then if still failing, check for stuck down button(will cause it) confirm actuation in diagnostics, which work tilted or not. In mechanical buttons a stuck down is the only problems I have run across.


edit added; Neither of those are monitor tilts 

[Tilt]

This doesn't look like an I-game.  What type of machine is it?  I deleted the duplicate post.

[rickhunter]

It's AVP.  The Board Monitor tilt is also sometimes related to the power harness between the MPU's power supply and the mpu's mainboard.  IGT had a recall on these as they got dirty and the contacts had faults in them.  They either replaced the cable or instructed the casino to clean the harness with a cleaning solution.  The button panel tilt is either the blackfin board having issues (check all usb cables and the "HDMI" cable that goes from the blackfin board to the button panel), or a loose button connector on the oled buttons.

[Tilt]

Thanks Rick.  Moving to AVP forum.