Double 3X4X5X Times Pay

[Ramiro83]

Hi I just purchased a new kit for my S2000 and its the Double 3X4X5X Times Pay. Can anyone who has this game title or similar confirm what SG chips you have installed? This game comes with the SB100783 chip.

Also the S2000 has a button to change credit value. I have seen some s2000 where you can change the denomination on the actual front panel by touching the credit value you want to bet. Is it possible to convert my S2000 to do this and if so what parts would I need and how.

[rickhunter]

Post a photo of your machine.  The door from both sides so we can see what you have and what you would need.  At the very best, you would just have to buy the multi-denom touch board.  At the very worst, you would have to get a new button harness  with 663 vfd configuration and then the multi-denom touch board.

[Ramiro83]

Images Attached

[Yoeddy1]

Are your strips installed right?  You shouldn't be able to see the part numbers of the strips.

Jason

[Ron (r273)]

Looks like the strips are just lapped at the end the wrong way.


For Multi- Denominational set-up see two ways to do it with the attached made by our dear departed friend Roadroad94. 

[Ramiro83]

The reel strips are on top of the original reel strips. They on like that as I was testing to see if the new game I got would work.

Thanks for the document I'll take a look.

[rickhunter]

Ok, based on your photos this is what you need.  The document that Railroad94 made details the procedure and it is a good doc to have.

Looks like you already have the button to change denom.

This is what you need if you want the touchpad.
You have a 552 display panel.  You will need to get a 663 display panel, a multi-denom touch board, a 4 denom sticker, and a new player button harness to connect the new 663 display panel (basically ALL the wiring under your buttons need to be changed out).  A lot of our dealers here sell all this stuff, and it's probably under $100 to get it all.  I recommend you just get another 5 button player panel assembly with the correct harness as moving the harness in and out of all the buttons can be a pain.  You might also consider getting 14 button deck for future use on a 5 reel conversion or a 3 reel multiline kit as well.

[Ramiro83]

Also, can anyone who has this game title or similar game title confirm what SG chips it should have installed? This game comes with the SB100783 chip.

Is there any documentation that shows what SB chips are out there and what SG chip it should be pared with? Additionally with what Simm audio card will work with what SB chips?

The [/size]DSV00042 GENERIC S2000 SOUND SIMM I have installed does not work with this [/size]SB100783 chip/[/size]game. Any recommendations on what Simm would work?

[foster]

SG 363 or 598 will do just fine.
it is only a 3 reel game.

[Yoeddy1]

Note too that this theme will only provide "legacy" sounds with a 42. 

Thanks,
Jason

[Ramiro83]

Any idea what SIMM would work? The legacy sounds are not so great :-/,

THANKS! :-)

[Yoeddy1]

42 is it.

Jason

[rickhunter]

games that only do legacy sounds will only ever do legacy sounds.  No workaround.

[Ramiro83]

For future reference how can I determine if a particular game/sb chip will do legacy sounds only?

[Yoeddy1]

I'm not sure if there is a list anywhere, but asking here before you buy is usually a good start.

Jason