S2000 Hopper Test Exits Immediately When Attempting a Test in 4 - IO Test
I installed a coin kit on my s2000 which has @Home TITO, MEI BV, gen2 Printer all programmed and working.
The coin comparator is working well, the hopper limit is now set to 1000000 and coins are directed properly to the hopper as expected.
I don’t need the hopper to function as it’s really just a big piggy bank. However since I bought it I do want to ensure it works so went into Section 4 - IO Tests and went to Hopper / Printer and attempted to perform a Hopper test.
There are no credits in the machine :-)
When entering the Hopper test it for a half of second displays turn the jackpot key to start dumping quarters, however immediately exits the test thereafter before I can even read it or do anything. All other tests work for other devices such as the printer just not the hopper.
I suspect something is bad on the hopper or maybe something else with the harness.
Anyone ever see this before?